Baltimore Blames Fatberg for Sewer Overflow

Sept. 29, 2017
More than 1 million gal of sewage was released into a Maryland stream
The Baltimore Public Works Department blamed a “fatberg" made up of grease, fat, wet wipes and other garbage that slowly grew in a Baltimore sewer main for the release of more than 1 million gal of sewage into a Maryland stream. The Baltimore public works department says the massive plug near Baltimore Penn Station caused the overflow into Jones Falls Sept. 21 despite dry weather. Baltimore's fatberg appears modest compared to monsters dredged up in Britain. In London, Thames Water engineers this month began a three-week sewer war against a fatberg almost the length of three football fields and weighing 130 tons—more than 10 of the city's iconic, double-decker buses. In Baltimore, authorities began to smell trouble when overflows of the sanitary sewer started to become common following heavy rains. Finally, a dry-weather overflow convinced the department to take a peek. They sent a machine with a closed-circuit TV camera into the sewer, and soon discovered the walls of the sewer pipe were caked with congealed fats, oils and grease (FOG). While working in the pipe, a backup occurred, leading to another sewer overflow. Engineers estimate 85% of the pipe, which is 24-in. across and more than 100 years old, is blocked. Most of the gunk has been scraped away, and any repairs or replacement of the sewer pipe will be determined once the fatberg has been entirely removed, the department said. The overflow is diverted into the storm water system and then into the Jones Falls. The overflow system will be closed once a related wastewater treatment project is completed in late 2020, the department said. The city’s sewers are being repaired and replaced to avoid infiltration of storm water. The department has a FOG program that includes monitoring food service outlets that discharge wastewater. Officials urge everyone to can the grease, trash and even "flushable" wipes.

Sponsored Recommendations

Benefits of Working with Prefabricated Electrical Conduit

Aug. 14, 2024
Learn how prefabrication of electrical conduit can mitigate risk, increase safety and consistency, and save money.

Chemical Plant Case Study

Aug. 14, 2024
Chemical Plant Gets a Fiberglass Conduit Upgrade

Electrical Conduit Cost Savings: A Must-Have Guide for Engineers & Contractors

Aug. 14, 2024
To help identify cost savings that don’t cut corners on quality, Champion Fiberglass developed a free resource for engineers and contractors.

Energy Efficient System Design for WWTPs

May 24, 2024
System splitting with adaptive control reduces electrical, maintenance, and initial investment costs.