Nampa, Idaho Wastewater Division to Upgrade System with Centrisys/CNP MagPrex Installation

March 3, 2022

Nampa, Idaho Wastewater Division has partnered with Centrisys/CNP to implement two MagPrex biological nutrient removal systems.

undefined

Centrisys/CNP, a North American manufacturer of decanter centrifuges and advanced biosolids treatment technologies, announced a partnership with Nampa, Idaho Wastewater Division to implement two MagPrex biological nutrient removal systems with sequestration as part of its phase II upgrades. These improvements will allow Nampa to meet new regulations that mandate Idaho cities to lower phosphorus in wastewater discharge.

“This will be our second MagPrex installation in Idaho following last year’s design of the system at the Meridian Wastewater Resource Recovery Facility which will be implemented this year,” said Gerhard Forstner, president of CNP and nutrient treatment expert. “Nampa’s consulting engineer, Jacobs Engineering Group Inc., thoroughly evaluated the benefits of our nutrient removal system, and in partnership with our manufacturer’s representative, Treatment Equipment Company, Centrisys/CNP was awarded the project that will support their phase II initiatives. We are confident the installation will help the city of Nampa achieve its phosphorus reduction goals, as well as reduce polymer and maintenance costs.”

In 2010 the City of Nampa began working with technical experts and a committed group, called the Nampa Wastewater Advisory Group, to evaluate options for updating wastewater infrastructure. The group recommended improving Nampa’s wastewater treatment in multiple phases, including reducing phosphorus to an intermediate level. Phase II includes additional phosphorus reduction to aid in lowering the temperature of nearby Indian Creek and replacing infrastructure at the plant that has reached the end of the lifecycle.

MagPrex’s biological phosphorus removal directs most phosphorus into the solids stream in the form of struvite for dewatering with the cake. By concentrating the phosphorus in the solids stream, Nampa will permanently remove a significant portion of phosphorus from the overall treatment process.

The Nampa Wastewater Division’s MagPrex systems will significantly improve treatment efficiency, including:

  • Reduced polymer consumption up to 30 percent
  • Reduced disposal costs up to 20 percent
  • Reduced phosphate recycle loads up to 90 percent
  • Reduced maintenance costs up to 50 percent
  • No sodium hydroxide required for pH change

Forstner added, “The new system will aid the city in meeting low effluent phosphorus limits. Rather than using costly and environmentally damaging chemicals, MagPrex will mitigate the high phosphorus levels at the plant with a pioneering process for wastewater treatment plant biosolids optimization and phosphorus recovery.” 

Similar to the system implemented in Meridian, Idaho, Nampa’s MagPrex systems will allow operators to prevent struvite buildup on the biosolids process equipment and piping and enable the Wastewater Division to meet regulatory requirements. These requirements include additional reductions in phosphorus and lowering the treated water temperature prior to discharging it into Indian Creek.

Centrisys/CNP now has eight MagPrex installations in the United States, with the Nampa Wastewater Division systems projected to be operational by early 2023.

For more information about Centrisys/CNP, MagPrex, and Nampa’s MagPrex installation, visit www.centrisys-cnp.com

Sponsored Recommendations

Benefits of Working with Prefabricated Electrical Conduit

Aug. 14, 2024
Learn how prefabrication of electrical conduit can mitigate risk, increase safety and consistency, and save money.

Chemical Plant Case Study

Aug. 14, 2024
Chemical Plant Gets a Fiberglass Conduit Upgrade

Electrical Conduit Cost Savings: A Must-Have Guide for Engineers & Contractors

Aug. 14, 2024
To help identify cost savings that don’t cut corners on quality, Champion Fiberglass developed a free resource for engineers and contractors.

Energy Efficient System Design for WWTPs

May 24, 2024
System splitting with adaptive control reduces electrical, maintenance, and initial investment costs.