Easi-Set buildings are low-maintenance, 100% precast concrete industrial-grade buildings, proven for water or wastewater applications, as well as pump stations, well houses, headworks, hazmat, storage, control buildings, offices, maintenance, laboratories and more.
Sites can be made operational quickly with fast installation and simple site preparation. Patented precast post-tensioned roof and floor systems require no foundations. Buildings are delivered pre-assembled and in many cases pre-outfitted, and are placed on a crushed stone base. They can also be delivered without a floor for placement on a site-poured slab or over existing equipment. Larger buildings are site-assembled in a matter of hours, not weeks. Easi-Set buildings cost less than comparable site-built construction and are re-locatable, if needs change.
Standard sizes are pre-engineered with stamped calculations and drawings with sizes starting at 8 ft by 2 ft. Easi-Span buildings are the largest clear span all-concrete buildings on the market, and the only expandable concrete building system in sizes up to 50 ft by 50 ft, with multiple-story heights. Easi-Span roofs come in 1-ft sections with 20-, 24-, 30-, 40- and 50-ft widths. Any of the buildings can be custom designed to meet specific applications.
Easi-Set buildings will not rust, warp, corrode, rot or burn and the finish is retained without maintenance. They are designed to be weather-tight and to withstand the forces of Mother Nature and human nature alike. Post-tensioning increases average compressive strengths by 28% and distribution of radial compressive forces by 33%, making them highly impact resistant.
Steel-reinforced precast concrete construction along with galvanized steel insulated doors, tamper proof hinges and deluxe door hardware with deadbolts provides protection from vandals.
Easi-Set buildings are: UL 752 —Level 5 bullet resistant; fire resistant to a standard fire rating of 1.5 hours with additional protection available; earthquake rated to Seismic Zone 4; hurricane resistant up to 150-mph wind loads; and have the ability to withstand petrochemical blasts.
Water-tight features include: prefabricated turn-down roofs with an architectural ribbed drip edge protecting the roof joint from direct exposure to driving rain and moisture penetration; above-door rain guard drip edge protection; galvanized door and frame; an extruded aluminum threshold with integral neoprene seal provides unsurpassed moisture, dust and pest resistance; step-down perimeter floor, recessed so that the wall joint is below top of floor; and an improved radial post-tension design providing superior water-tight construction. In addition, all roofs are backed with a 100-year roof guarantee.
Contact Us
Easi-Set Industries
Midland, VA
866.252.8210
www.precastbuildings.com
[email protected]
