Construction of Deep Tunnel Will Reduce Overflows and Energy Consumption

Dec. 14, 2011

Tunnel will reduce carbon footprint and operating costs in Kansas

Excavation of a 110-ft-deep entrance shaft signals the beginning of site work in the construction of an underground tunnel and pipeline designed by Black & Veatch to carry as much as 180 million gal per day (mgd) of treated wastewater by gravity nearly two miles from Johnson County Wastewater’s Mill Creek wastewater treatment plant in Shawnee, Kan., to a discharge point downstream of a water intake on the Kansas River.

An average of 10 mgd of plant effluent currently is pumped to the same discharge location, but a new means of conveying the effluent was necessary because the existing pumping station and force main do not have the capacity to pump extreme wet-weather flows. The tunnel will eliminate the risk of untreated wastewater flows into nearby Mill Creek and the Kansas River that periodically results with heavy rains.

When completed in late 2013, the tunnel will reduce the county’s carbon footprint and operating costs by eliminating the current need for electricity to pump the effluent. It is estimated to save more than $200,000 annually in moving ultimate future flows, which will partially offset the cost of the essential upgrade.

The pumping station and force main will be taken out of service after completion of the project, which includes construction of new plant piping to convey treated wastewater from the plant’s final treatment processes to the tunnel as well as piping within the tunnel. Black & Veatch designed and is providing construction services for the project.

S.J. Louis Construction of Texas leads construction of the 110- to 180-ft-deep tunnel, in which a 96-in.-diameter, fiberglass-reinforced pipe will be grouted into place. Design and construction challenges include tunneling adjacent to the Kansas River through methane-containing shale and the potential for high groundwater inflows in the shaft excavations.  
 

Source: Black & Veatch

Sponsored Recommendations

Blower Package Integration

March 20, 2024
See how an integrated blower package can save you time, money, and energy, in a wastewater treatment system. With package integration, you have a completely integrated blower ...

Strut Comparison Chart

March 12, 2024
Conduit support systems are an integral part of construction infrastructure. Compare steel, aluminum and fiberglass strut support systems.

Energy Efficient System Design for WWTPs

Feb. 7, 2024
System splitting with adaptive control reduces electrical, maintenance, and initial investment costs.

Blower Isentropic Efficiency Explained

Feb. 7, 2024
Learn more about isentropic efficiency and specific performance as they relate to blowers.